Tuning Bambulab P1S

5 (1)

Emergency Door Handle for Bambu X1, X1C, P1S Simply slide it onto the door handle

Z-axis cover. Cover to make the printer look better and prevent filaments or dirt from causing problems. I created this cover because the others I found either didn't fit correctly or the part that was attached ended up being damaged. So I created my own, which is easy to install and has good resistance. The fit is good. Note: the shaft at the back of the printer is a little tricky to fit, I recommend starting with the part that is open at the front, attaching the 2nd part and then rotating to the correct position.

AMS feeding guide – Easy compliant mechanism  YouTube ShortI came up with an really interesting solution for the AMS feeder.A simple compliant mechanism ensure a perfect fit for best guidance.You simple slide and push it down for installation.Wear and tear protection through perfect guideBetter grip button → no more sore fingersHelps to solve feeding errorsFits all AMS versions! → (For AMS not AMS2/HT)Simple print, no support no fancy partsVery Easy to install and removeIt is very stable, no worry of breaking! (PLA, PLA+, PETG tested), but do not use silk or other filaments with weak layer adhesion.Long PTFE inlet guarantees that the hose does not come loose2 Versions:For Ø4 PTFE Tube ( Buildplate 1)Ø2 for using without PTFE Tube ( Buildplate 2) Personally i use PTFE tube with 4cm – 5cm length, but feel free to cut as long as you want, with less guide length it is easier to insert spools.For assembly make sure the PTFE do not overcame the flat surface.Tip: Twist the PTFRE Tube while insert makes it easier! V1.1 deeper arrow/deeper color and adjusted hole for use without PTFELeft v1.1 Right V1 If you like my work you can support me with Thumbs up👍, boost🚀 and a follow✔Happy Printing!😃 Have a look at my Desiccant Solution, as well: Commercial Licence, Mods and exclusive Models or just support me: Patreon Page  

The famous poop bin, now optimized to use just 220g of filament, down from the original 330g. This means you can use the printer included 250g rolls, even after you've made a few benchies. Takes less than 5 hours to print, even with my included high quality print profile. Remix changelog:Restructured the model to a uniform 1.6mm thickness, eliminating the need for infill except the heel.Removed the large fillet from the heel, so no need for supports anymore.Converted the Bambu Lab logo into a window by extruding it.  

* Get your Panda Hub Here 这是专为BIGTREETECH Panda Hub设计的安装外壳打印件，旨在将其固定至拓竹的P1P和P1S机器上。该外壳固定件搭配BIGTREETECH Panda Hub可有效减少外接USB设备在打印过程中对打印机原装USB接口产生的震动影响。请注意：除了下载并打印此安装外壳外，您还需要拥有BIGTREETECH Panda Hub，以便实现最佳效果。  

STOP(PY) your plates! The idea is not new but I could not find one design that met all my requirements:- Sufficient height to stop the plates from jumping over & perfect fitment for ease of use. I do have to give credits though to The shifty by JDJDJD & Build Plate Alignment Guides by Wiseone as their designs brought me here. The installation – Remove all supports to guarantee perfect fitment- Push the front corner (I) into place first- Snap the rear (II) into place- Repeat on other side The overall clearance is tight! but around 0.10mm at the final stop to maintain usability and easy removal (in case necessary) Et voilà! Blindfolded alignment every single time!Now also available for your A1! Striving for perfection with each and every designFeedback is always very welcome!Thx for stopping by! 😎 PD: As @milannekuhh had some trouble fitting its BentoBox, which according to Google is a Japanese lunchbox – but then turned out to be something totally different 😂, I have added a “slim” version so that this or any other Add-On for the P1P/S / X1C that sits inside the printer has enough clearance. PD2: A slight modification in design has been made as 2 users experienced a slight fitment issue due to pointier print beds. A huge thx to @VelocityOS at this point, for pointing this out, communicating with me and testing the new version. Since today (07.04.2025) both “stoppy” and "stoppy (slim)" are updated.

Full silica dry pod kit for AMS. Printed with Bambu Lab black PLA matte (see photos). Designed with a hygrometer hole that goes through all the middle pod. that allow an empty reading area for the hygrometer. Data cannot be distorted by silica too close to the reader. Link to the hygrometer used for this dry pod : https://www.amazon.ca/dp/B07BLY177S?psc=1&ref=ppx_yo2ov_dt_b_product_details ***MODEL WITH HYGROMETER SLOT AT 0° (UP/DOWN) NOW AVAILABLE***

I have designed theese vibration feet holders for my P1S. I was struggeling a bit with stability when using only one for each corner, this is gone now. It fits the BambuLab Anti-Vibration Feet for P1 Series and X1 Series: EU link: https://eu.store.bambulab.com/en-dk/products/anti-vibration-feet?srsltid=AfmBOopRsZxR3l5TEGn2Hm1Rz-vSaFP8dgEhRXiFmEmsZ9X-hXLT37OZ US link: https://us.store.bambulab.com/products/anti-vibration-feet?skr=yes&srsltid=AfmBOopRsZxR3l5TEGn2Hm1Rz-vSaFP8dgEhRXiFmEmsZ9X-hXLT37OZ  I recommend doing a complete calibration after installing the new feet. Be aware there is two different holders since the splines is mirrored in each corner.